Paper tuning new bow

[307hunter]

I recently bought a new X-Force Dream Season and am having a hard time paper tuning it. To get a half decent tear through paper I have to have the rest into the riser so the fleching barely clears it. It is a long way from center. I have heard to tune it until the tear is perfect but it seems strange to have the arrow so far into the riser. Is something wrong with the bow? My last bow shot bullet holes so I don't think it is my form. I can shoot a good group if it isn't tuned perfect but my broadheads don't shoot the same holes. Any ideas would be great thanks.

[Jerod B.]

1. are the cams in sync??

2. what is the poundage and draw length??

3. arrow spine??

4. high or low at all??

we got an x-force GX dream season at the shop, no matter what the shop tech did, it would not stop tearing left....in his 30 years he NEVER found a bow that would not tune up with a drop away....tried every arrow he could, adjusted cams, nock height.....etc, etc,..........

[bear402]

In addition to J.B's questions to consider, one thing to check is the top yoke cable alignment.

Place an arrow on a flat portion of your upper cam with the main portion of the shaft running parallel with the string.

The string should run a fairly equal distance in parallel with the entire length of the shaft .

If it does not then a yoke adjustment will probably be neccessary.

In my experience on a bows that tune with the shaft in close to the riser , a few twists to the outboard yoke cable can often help eliminate a left tear. After this adjustment a bullet hole through paper can usually be achieved with the arrow more towards center shot on the riser.

[Jerod B.]

In addition to J.B's questions to consider, one thing to check is the top yoke cable alignment.

Place an arrow on a flat portion of your upper cam with the main portion of the shaft running parallel with the string.

The string should run a fairly equal distance in parallel with the entire length of the shaft .

If it does not then a yoke adjustment will probably be neccessary.

In my experience on a bows that tune with the shaft in close to the riser , a few twists to the outboard yoke cable can often help eliminate a left tear. After this adjustment a bullet hole through paper can usually be achieved with the arrow more towards center shot on the riser.

Bear touched on the first thing we do...adjust yoke(if static).....slipped my feeble brain

[WI-DOE-MAKER]

I'm sure your form is fine, but just for GP have another good shooter shoot your new bow and see what type tear he gets..sometimes it's just simple hand torque..be sure you're not gripping the bow too tight.

[bhaun995]

Pandora UK
Ralph Lauren Outlet Online
Adidas NMD
Vans Shoes
Ralph Lauren Shirts
KD 10 Shoes
Pandora Ring
Nike Kyrie 3
Kyrie 4
Tory Burch Outlet
Yeezy boost
Coach Handbags
Pandora Bracelets
Ugg Outlet
Pandora Rings
Canada Goose parka
Pandora Jewelry
Ralph Lauren Outlet
Adidas NMD Womens
Michael Kors Outlet Online
Harden shoes
Pandora Jewelry Official Site
Moncler Jackets
Valentinos
Ralph Lauren Polo
Timberland Boots For Women
KD 10 Shoes
Nike Kyrie 3
North Face Jackets Clearance
Timberland Boots For Women
Jimmy Choo Shoes
The North Face Jackets

[denay56]

Air Max 90
Ralph Lauren Outlet Online
Birkenstock Shoes
Christian Louboutin
Air Max 95
Polo Ralph Lauren
Adidas Ultra Boost
Adidas Outlet
Nike Air Max 2018
Curry Shoes
Birkenstock Sandals
Kyrie 3 Shoes
Birkenstock Outlet
Michael Kors Canada
Birkenstock
Nike Huaraches
Adidas Yeezy V2
Soccer Cleats
Pandora Charms
Jordans 11
Nike Air Vapormax
Yeezy Boost 350 V2 Blue Tint
Fenty Puma
Yeezy 350 Boost
Goyard
Pandora
Air Jordan 11
Pandora Charms
Nike Outlet
Michael Kors
Michael Kors
Adidas Yeezy
NMD R1
Yeezys Shoes
Michael Kors Canada Outlet
New Jordans 2018